HotSpot Parts
Guide Page 07
USB To TTL hookup for the Nextion Display.
The USB To TTL Device
This is used to drive the Nextion display from a USB Port.
PURCHASE AT: AMAZON
USB To TTL Nextion Display Hookup
This is how I hookup the Nextion Display. I allow the Nextion Display wires to come out about the ethernet connector and run them to the TTL Input/Output of the USB to TTL Device. This then allows the Nextion Display to send commands back to the Raspberry Pi OS through the Nextion Display Driver.
Proceed to the “Next Guide Page” by clicking on the “Right Pointing Arrows”.
This is how I hookup the Nextion Display. I allow the Nextion Display wires to come out about the ethernet connector and run them to the TTL Input/Output of the USB to TTL Device. This then allows the Nextion Display to send commands back to the Raspberry Pi OS through the Nextion Display Driver.
Proceed to the “Next Guide Page” by clicking on the “Right Pointing Arrows”.